There was some Parametric EQ used on it, but you don't have to use that if you don't have it. But, we also used the regular equalizer on it, and just put low on 62, mid on 52, and high on 18, and there ya have it. THE COOLEST 808 AROUND lol
We slapped some distortion on it and put the settings for it at, 30 gain and -14 dB on the WS3 selection. SLAP A FILTER ON IT, and the cutoff has to be at 3217 Hz, on lowpass btw, and 0 on reso. Make sure you put a Wubfilter on it. Have it on the lowpass setting and put the cutoff on max, filter drive on max, and reso at 0. For the LFO section, just put it on the wavey looking one and have the speed at 0.18 Hz and depth at 0.
Thanks. But, we used magic. lol No, we used the VA Synth, has the Osculator 1-2 (Osc 1-2) octave at 0, tune at 0 cents. Osculator 2 (Osc 2) coarse at 0, the level at 0, noise at 0, cutoff at 30, reso at 65, velo at 0, Env at 5, filter and amp attack at 0, filter decay at 6, amp decay at max, filter sustain at 57, amp sustain at 0, filter release at 5, amp release at 0. For the Glide, the mode was mono, we had bend at 0, and the rate at 35. For LFO, we had the rate at 0.08 Hz, Vibrato at 0, and filter at 0.
Comments
𝓚𝓲𝓷𝓰_Trapp𝟛𝟙 ♪
im bouta usse dat 808 btw
𝓚𝓲𝓷𝓰_Trapp𝟛𝟙 ♪
WHOOOOOOOOOOO🔥🔥🔥 This heat 🥵
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
had the Osculator 1-2*
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
That took a while lol
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
There was some Parametric EQ used on it, but you don't have to use that if you don't have it. But, we also used the regular equalizer on it, and just put low on 62, mid on 52, and high on 18, and there ya have it. THE COOLEST 808 AROUND lol
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
We slapped some distortion on it and put the settings for it at, 30 gain and -14 dB on the WS3 selection. SLAP A FILTER ON IT, and the cutoff has to be at 3217 Hz, on lowpass btw, and 0 on reso. Make sure you put a Wubfilter on it. Have it on the lowpass setting and put the cutoff on max, filter drive on max, and reso at 0. For the LFO section, just put it on the wavey looking one and have the speed at 0.18 Hz and depth at 0.
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
Thanks. But, we used magic. lol No, we used the VA Synth, has the Osculator 1-2 (Osc 1-2) octave at 0, tune at 0 cents. Osculator 2 (Osc 2) coarse at 0, the level at 0, noise at 0, cutoff at 30, reso at 65, velo at 0, Env at 5, filter and amp attack at 0, filter decay at 6, amp decay at max, filter sustain at 57, amp sustain at 0, filter release at 5, amp release at 0. For the Glide, the mode was mono, we had bend at 0, and the rate at 35. For LFO, we had the rate at 0.08 Hz, Vibrato at 0, and filter at 0.
pear_qx
btw this is heat
pear_qx
how did you guys make the 808s
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
Oooookaaaay.