I slapped some distortion on it and put the settings for it at, 30 gain and -14 dB on the WS3 selection. SLAP A FILTER ON IT, and the cutoff has to be at 3217 Hz, on lowpass btw, and 0 on reso. Make sure you put a Wubfilter on it. Have it on the lowpass setting and put the cutoff on max, filter drive on max, and reso at 0. For the LFO section, just put it on the wavey looking one and have the speed at 0.18 Hz and depth at 0.
I used the VA Synth, has the Osculator 1-2 (Osc 1-2) octave at 0, tune at 0 cents. Osculator 2 (Osc 2) coarse at 0, the level at 0, noise at 0, cutoff at 30, reso at 65, velo at 0, Env at 5, filter and amp attack at 0, filter decay at 6, amp decay at max, filter sustain at 57, amp sustain at 0, filter release at 5, amp release at 0. For the Glide, the mode was mono, we had bend at 0, and the rate at 35. For LFO, we had the rate at 0.08 Hz, Vibrato at 0, and filter at 0.
Comments
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
It's just a regular snare with max gain and punch.
𝓚𝓲𝓷𝓰_Trapp𝟛𝟙 ♪
Snares are goated, is there a clap layered with them? I really like that sound
𝓚𝓲𝓷𝓰_Trapp𝟛𝟙 ♪
Fire af 🔥🔥🔥
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
No problem.
WICK BEATZ
Awesome. Thank you for telling me that ProBeatz. I’m gonna get to work on it. I really appreciate this!
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
Good to know.
Peachesꕥ (inactive)
Snare is a little loud, but I like the piano melody.
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
I used the regular equalizer on it, and just put low on 15, mid on 15, and high on 15. Hope I helped Wick.
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
I slapped some distortion on it and put the settings for it at, 30 gain and -14 dB on the WS3 selection. SLAP A FILTER ON IT, and the cutoff has to be at 3217 Hz, on lowpass btw, and 0 on reso. Make sure you put a Wubfilter on it. Have it on the lowpass setting and put the cutoff on max, filter drive on max, and reso at 0. For the LFO section, just put it on the wavey looking one and have the speed at 0.18 Hz and depth at 0.
𝓐𝓬𝓮𝓑𝓮𝓪𝓽𝔃✨
I used the VA Synth, has the Osculator 1-2 (Osc 1-2) octave at 0, tune at 0 cents. Osculator 2 (Osc 2) coarse at 0, the level at 0, noise at 0, cutoff at 30, reso at 65, velo at 0, Env at 5, filter and amp attack at 0, filter decay at 6, amp decay at max, filter sustain at 57, amp sustain at 0, filter release at 5, amp release at 0. For the Glide, the mode was mono, we had bend at 0, and the rate at 35. For LFO, we had the rate at 0.08 Hz, Vibrato at 0, and filter at 0.